As the newest feature of our production activities we present the laser cutting of metal, where the technology of laser cutting allows unlimited material width (Fe, Rf, Al) of various thicknesses (up to 20 mm) and with accuracy up to 0.1 mm.
The most important feature is that the technology provides fast, simple and cost-effective solution for the product you ordered. The service is performed with quality; you e-mail us you plan in the DXF format, we prepare our offer, which is followed by the preparation programme for laser cutting.
Advantages of laser cutting
Laser cutting represents much more that only a substitute for conventional procedures like sawing, drilling and even punching.
By laser cutting of metal the production costs are significantly reduced, because there is no unnecessary storing of parts between individual production phases, and, last but not least, there is no subsequent processing like de-burring and cleaning of products. Furthermore, by choosing the appropriate procedure of laser cutting there is often a decrease in number of components required.
However, the main advantage of this procedure is the fact that it allows making of pin and break joints and position fittings. These structures considerably simplify the subsequent production steps, which in turn shorten the extent of installation, and even welding can become unnecessary.
As you were able to find out for yourself, all of the above mentioned characteristics decrease the production costs and guarantee higher quality of the product.
Quality, environment friendliness and cost-effectiveness are vital
An important point in deciding “for” or “against” laser cutting is the final quality of the product.
If we want to have a quality product, where we must take into account the specific design of the product, the laser cutting is the best solution, because offers precise and quality manufacture of the most demanding products.
Also, we must consider the effect on the environment. Because the process is automated it does not produce additional noise, which would pollute the surroundings.
We have all the required materials in stock so we can manufacture your product in a very short time. You can deliver you plan in the DXF format, with which we will then make a programme and preparation for laser cutting.
more information
For more information write to laser@kovinc.si, call us on + 386 4 281 65 03 or contact us through a contact form.
